THROWBACK MIRRORS

from A$130.00

Throwbacks have taken some time to develop, but they were made with a very simple core vision in mind; that not all bar end mirrors need to be a toss up of function versus form.

After the early period of Kelpi Custom Moto, we began to see the need for bar end mirrors that were better for vision than traditionally mounted stock mirrors, whilst also looking much tidier and ensuring a clean and custom handlebar profile. Prior to the Throwbacks, when needing this styling on our custom builds, we were stuck forking out $300+ for OEM products (and couldn’t justify that!).

Upgrades to the bar end mounting internals reduces the vibrations and improves the mirrors staying power to limit movement once secured into place. The bar end cap was then thickened to reproduce the vibration dampening of bar end weights, with the stems tripled in thickness for added strength. It also gives much better impact protection for your bars, which is never a bad thing!

The mirrors and housing itself needed to be as lightweight as possible to limit vision-blurring vibrations. Its lightness against the heavier bar end component ensures the setup was easier than ever to mount up and “set and forget”, rather than needing adjustments to ensure the position stayed correct for the bars and bike over time. With E-marked certification printed on the mirror lens (which is more than 80 square centimetres), the boys in blue can’t offer the slightest bit of trouble on this mod.

It’s a hard thing to get right; mods that improve the function and aesthetics of your motorcycle without costing an arm and a leg. We’re proud of the Throwbacks, and hope you love them too!

  • Bar end fitment universal adapters to suit all standard (22mm or 7/8”), Harley (1”) and fatbar style bars (7/8” tapered to 1 1/8”). Minimum handlebar internal diameter of 14mm required.

  • If wanting to run them directly on your bar end weights, the internal mounting on the throwbacks can be removed, offering a direct clamp setup that works for 19-21mm diameter bar end weights, or without the internal shim for 29-31mm bar end weights.

  • Mirror lens 130mm max length and 80mm max width.

  • Black powder coated CNC alloy bar end and stem,

  • ABS plastic mirror housing

  • Stainless steel fasteners and housing adjuster rear mount

  • Sold as a pair

  • Yamaha threaded bar end mounts are compatible with all generations of XSR900, XSR700, MT07 and Tracer 700, as well as MT09 models from 2014-2020

We’ve upgraded mirrors on more bikes than we can count and it’s important to get it right - if you’re unsure give us a call or send us an email.

Mounting Hardware:
Quantity:
Add To Cart

Throwbacks have taken some time to develop, but they were made with a very simple core vision in mind; that not all bar end mirrors need to be a toss up of function versus form.

After the early period of Kelpi Custom Moto, we began to see the need for bar end mirrors that were better for vision than traditionally mounted stock mirrors, whilst also looking much tidier and ensuring a clean and custom handlebar profile. Prior to the Throwbacks, when needing this styling on our custom builds, we were stuck forking out $300+ for OEM products (and couldn’t justify that!).

Upgrades to the bar end mounting internals reduces the vibrations and improves the mirrors staying power to limit movement once secured into place. The bar end cap was then thickened to reproduce the vibration dampening of bar end weights, with the stems tripled in thickness for added strength. It also gives much better impact protection for your bars, which is never a bad thing!

The mirrors and housing itself needed to be as lightweight as possible to limit vision-blurring vibrations. Its lightness against the heavier bar end component ensures the setup was easier than ever to mount up and “set and forget”, rather than needing adjustments to ensure the position stayed correct for the bars and bike over time. With E-marked certification printed on the mirror lens (which is more than 80 square centimetres), the boys in blue can’t offer the slightest bit of trouble on this mod.

It’s a hard thing to get right; mods that improve the function and aesthetics of your motorcycle without costing an arm and a leg. We’re proud of the Throwbacks, and hope you love them too!

  • Bar end fitment universal adapters to suit all standard (22mm or 7/8”), Harley (1”) and fatbar style bars (7/8” tapered to 1 1/8”). Minimum handlebar internal diameter of 14mm required.

  • If wanting to run them directly on your bar end weights, the internal mounting on the throwbacks can be removed, offering a direct clamp setup that works for 19-21mm diameter bar end weights, or without the internal shim for 29-31mm bar end weights.

  • Mirror lens 130mm max length and 80mm max width.

  • Black powder coated CNC alloy bar end and stem,

  • ABS plastic mirror housing

  • Stainless steel fasteners and housing adjuster rear mount

  • Sold as a pair

  • Yamaha threaded bar end mounts are compatible with all generations of XSR900, XSR700, MT07 and Tracer 700, as well as MT09 models from 2014-2020

We’ve upgraded mirrors on more bikes than we can count and it’s important to get it right - if you’re unsure give us a call or send us an email.

SPLITTER BAR END MIRRORS
from A$100.00
SICCEM GRIPS
A$30.00
2014-2021 XSR900 / MT09 FULL STAINLESS EXHAUST SYSTEM
from A$825.00
2022+ XSR900 / 2021+ MT09 FULL STAINLESS EXHAUST SYSTEM
from A$1,240.00
SPOTTER 3-1 RED+AMBER INDICATORS 2.0
A$120.00